Home > Products > Shot Blasting Machine Application > Foundry Shot Blasting Machines

Hook Shot Blasting Cleaning Peening Machines Stepping Foundry Chain Hanger type FTQ38 Series

FTQ38 series Chain hanger hook shot blasting cleaning machines, shot peening machines/FTQ48 series Stepping foundry shot blasting machines Hanger Chains Type shot blasting machine The chain hoist uses the normal hanging conveyor. The hook moves step by step. With every step forward, the chain...

Description

FTQ38 series Chain  hanger hook shot blasting cleaning machines, shot peening machines/FTQ48 series  Stepping foundry shot blasting machines


Hanger Chains Type  shot blasting machine



      Item

Specifications

FTQ482

FTQ483

FTQ484

FTQ485

-

Hook max loading capacity/kg

200

300

400

500

Designed as per the workpiece size and customer's requirement

Max cleaning size
Φ/mm×h/mm

500*1200

700*1200

800*1500

1000*1500

Production capacity/(hook/h)

20-30

20-30

20-30

20-30

Hook operating speed/(m/min)

1-2

1-2

1-2

1-2

Cleaning quantity/pc

2

2

2

2

Can be adjusted by the customer's production quantity and speed

Impeller head

Qty/set

4

4

6

6

Can be adjusted by the customer's production quantity and speed

Blasting qty perset/(kg/min)

250

250

300

300

Power per set/kw

15

15

18.5

18.5

Outside size/mm

4500*5500*5000
(under the ground is 1800)

5500*5500*6000
(under the ground is 2000)

6000*5500*7500
(under the ground is 2000)

8000*10000*7500

(under the ground is 2000)

The outside can be designed by customer's requirement

Total power(not including dust removal)/kw

78

80

130

136


The chain hoist uses the normal hanging conveyor. The hook moves step by step. With every step forward, the chain hoist sends the workpieces on the hook from the front door into the cleaning room. After the workpieces finish cleaning at the given position, the chain hoist starts to move again and take the cleaned castings out of the machine. Then the same number of hooks enter into the cleaning room. The whole cycle begins again and again. 


This machine has the following features:

1) Clean under the fixed point and rotation. The shot blasting time can be adjusted. Well cleaning efficiency. Easy to load and unload castings in static conditions.

2) Clean with the chamber door closed. Sealing performance is better than that of continuous catenary shot blasting machine.

3) The chain hoist costs lower than the accumulating type and needs simple maintenance.


Hook lifting type shot blasting machine is mainly used for the shot basting of the whole compartment of tank cars, various large or medium-sized structural parts and chassis. This shot blasting machine has an all-round design using the impeller head with advanced double disc-like straight blades. The high-speed intensive shots flow is blasted onto the all parts of the workpiece to quickly remove the rust layer, scale and dirt. Through the shot blasting, the structural parts surface is clean with certain roughness, which helps improve the adhesion between the film and steel surface and makes preparation for the next procedure. At the same time, it can eliminate the welding stress, increase the fatigue and anti-corrosion resistance as well as prolong the service life in order to improve the quality of workpiece surfaces.


Technological process

Send workpieces to the hook rack bottom on the conveying flatcar → the hook hoists workpieces → electric blocks carry the workpieces to the blasting area →do shot blasting cleaning and change the speed of the hook and then pass through → finish cleaning and return back→ the workpieces enter into the blasting area → do shot blasting cleaning and change the speed of the hook and then return back to shots loading area → shots feeding→ enter into the next procedure.


Characteristics of the equipment:

☆ Make preparations for shot blasting cleaning

☆ Adopt three-dimensional dynamic simulation of mass ejection to design the layout of the blasting chamber and the impeller head

☆ Use the Impeller heads with high-efficiency straight blades to significantly improve the cleaning efficiency and ensure cleaning effect

☆ Completely closed design. Make sure the workpieces are in a relatively closed space. Ensure that the shots won't splash out of the chamber.

☆ Use electric hoist with the function of walking and lifting, which can lift automatically in the shots loading and feeding area. The moving speed of workpieces is adjustable in the blasting area to achieve the required quality.

☆ Use double blocks to hoist workpieces and do shot blasting cleaning.

☆ Finish a series of procedures including shots preparing, fast operation, fast in after speed controlling, shot blasting cleaning, fast out after speed controlling and shots feeding. The shots preparing and feeding are done by using flatcars.

Certificate.jpg



National Inspection and Test Service Center of Metal Surface Treatment.jpg




We, PHOTY CASTING, now take pride in introducing us as one of the leading manufacturers and suppliers of the Hook Shot Blasting Cleaning Peening Machines Stepping Foundry Chain Hanger type FTQ38 Series in China to you. Welcome to buy the precise machine from our factory. It's of high precision and good performance.

Related Products

Feedback

We're Here to Help

  • Add:Dalong Industrial Park, Xituan Town, Dafeng District, Yancheng City, Jiangsu Province, China
    Tel:+86-515-83755555
    Fax:+86-515-83752143
    Mob:+86-13912337992
    E-mail:ycfengte@photycn.com
    Skype:joycezhaomin1986
    WhatsApp:+8613912337992

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!