Shot blasting machine after installation of the product quality cleaning is very important, if the angle adjustment is not good, can not achieve the effect of cleaning, but also destroyed the casting.
The shot angle of the shot blasting machine must be adjusted in time, shot blasting machine provides a special provision, you can freely control its direction in the range. After the cast, it will be in the top of the metal plate, see the point of the left or right is not in the corner or 90 degrees angle is the best, more than this range should be adjusted in time. As long as the angle adjustment of the rationality can be appropriate to improve the speed of the projectile, so that shot blasting machine running smoothly to achieve the best mechanical performance. If the adjustment is completed, it will be biased, adjust the swing arm of the fastener distance and angle until the best angle to achieve so far.
Shot blasting machine structure is very complex, it belongs to the mechanical equipment self-mutilation, completely delivered to its task at the same time, you will be subject to varying degrees of damage. A clear understanding of its characteristics can be used to specifically relate the program. First of all, it is a need for regular maintenance and maintenance, followed by some parts to be replaced regularly, do the above, you can continue to live, or its life will be greatly reduced.
Shot blasting machine is an important part of the shot blasting machine, the location of the shot blasting machine directly or not directly affect the normal work of shot blasting machine, which requires the adjustment of shot blasting machine.
In the shot blasting machine, shot blasting control, should pay attention to the location of the directional blasting should be in the workpiece cleaning projectile projectile full coverage, otherwise it will affect the cleaning efficiency.
Directional window position, if necessary, can be painted with black ink or laying a piece of paper with a thick paper, placed in the cleaning of the workpiece position, start blasting device and artificial shot blasting equipment into the pill tube by adding a small amount of projectile, If the blood positioning error should be adjusted to obtain the desired position. Good direction adjustment, can be used for load testing, 30 minutes after the explosion, and then add 400kg projectile.
We're Here to Help